Please note this is a replacement operator and is not supplied with remotes or receiver card.
Heavy Duty Articulated Arm Swing Gate Motor with Adjustable Limit Stops
The FTX is designed for your homes brick pillars, piers or post installation allowing for a maximum opening span of up to 2 metres and the allowance of a maximum gate weight of 250kg.
This covers the large majority of typical installations for residential homes. Best of all the FTX houses its digital control board within the master motor which can be installed on either side of the driveway to best suit the installation requirements.
Further key benefits of the FTX are the adjustable limit stops to set the open and closed position with ease allowing an opening installation up to 110°. With its narrow footprint of only 165mm and centered holes at 50mm the FTX can be installed on either 75mm with a plate or 100mm posts.
All-in-One Design
The all in one design cleans up the installation substantially allowing any connected accessories and the systems power to feed directly into the MASTER unit with the on board digital control board.
Encoder Technology
Undisputedly the best technology the encoder motor is standard and will feedback to the system where the gate motor and effectively the gate is in its travel through the entire cycle.
Allowing for reliable operation regardless of any changes in operation be it due to temperature, wind or other factors. This is the technology you can rely on for constancy and peace of mind.
Adjustable Limit Stops
Designed for simplicity and ease of installation, no gate stop is required in any position with the completely adjustable open and closed position stops on each motor. The added benefit is it also keeps the driveway clear of any center stops (no more tripping hazards).
Manual Release
Easy to use manual release incase of power outage. Insert the supplied key and turn to unlock the manual release lever. To release turn the manual release lever and now the gate can be opened and closed manually. If required a battery backup system is available for completely uninterrupted operation. The system is completely housed within the master unit.
Specifications
Maximum Gate Width | 2M Each |
Maximum Gate Weight | 250KG Each |
Maximum Opening Angle | 110° |
Encoder | Yes |
Motor Power (Volts) | 24V DC |
Power (Watts) | 140W |
IP Rating | 44 |
Operating Temperature | -20° to +55° C |
Thrust (Nm) | 180 |
Duty Cycle | 40% |
Digital Control Board
By default the control board will be pre-configured for the best typical settings for most users however with the onboard digital display and easy to use scroll buttons the configuration options are almost endless. Out of the box it will be configured for OPEN/CLOSE + Partial Function (Partial opening of the gate) in a home you would just enable and set the automatic close timer (if required) and that’s it.
Power Inputs and Outputs
Typical input and outputs to power the system and any wired in accessories
24V Power Input24V Power Output For Accessories
Configurable Methods Of Operation
Wireless and Wired equipment can be configured in a number of different ways to support the best suited operation for the site, by default the system is configured for typical usage being full gate operation and pedestrian opening
Full Gate OperationPartial Open
Open Only
Close Only
Remote Operation
The remote buttons can individually be programmed to work in any of the below settings for each button.
OPEN-CLOSE (Reverting action if pressed part way through a cycle)OPEN-CLOSE (Sequential action if pressed part way through a cycle it will STOP)
Partial Operation
Motor Specifics
Default configurations are already set however, if required further adjustment can be made to suit all installations
ENCODER ControlAutomatic Calibration (with Adjustable Calibration Speed)
Motor Test (used for checking your directions prior to calibration)
Adjustable Thrust
Adjustable Travel Speed
Adjustable Sensitivity
Adjustable Slowdown Speed
Adjustable Slowdown Position (Two Stages)
Light Control
Multiple options for visible safety alerts, illuminating the driveway OR Both
Flashing/Static Illuminated Light from OPEN til CLOSEDAdditional Output for Flashing During Opening
Added Security
Added protection for the gates and gate system if wind is a factor or in a high risk setting
Automatic Electric Lock (Adjustable Time) with Reverse Thrust FeatureSafety Devices
Plenty of support to protect occupants, visitors and there vehicles with TWO Safety Inputs completely configurable in there functionality and method of operation with FOUR different logic settings available.
Supports Photocell SensorsSupports Reflective Sensors
Supports Safety Edge
Supports Induction Loops for Safety
Supports STOP Button
Supports Maintained Action (Hold to OPEN/CLOSE)
Operational Control
Infinite support for accessories and methods of operation
Remotes ControlsWireless Keypads
Wired Keypads
Wired Button
Induction Loops
Intercom Systems