Apache ARTICULATING Italian Solar OFF GRID Automatic Double Swing Driveway Gate Opener 24 Volt Kit ROBUST Heavy Duty Design with Wifi Mobile App Control and Keypad Entry

Kit Contents (See Description Tab for Full In-Depth Details)

• 

  Description

  Apache Low Voltage 24 Volt Flexible Articulated Arm Gate Operator

  

  The Apache 24 Volt Swing Arm operator is a versatile and flexible operator allowing for connection to gates from flush mounting (0mm) up to 300mm set in away from the mounting point of the operator. Strong and quiet the Apache can operate gates smoothly and with ease with a rated capacity of up to 2.5m per gate (5m opening) and up to a maximum of 200kg per gate.

  The oversized ALL METAL GEAR structure inside ensures a seamless operation without breakdowns or premature life unlike plastic and nylon gear sets. Also boasting a robust die-cast alloy case to encapsulate the gearing system all gears, motor and bearings are totally closed in and sealed from any outer elements. Built into the Alloy case we will also find the clever clutch release system (Emergency release) which is keyed to unlock for added security.

  The unique Night Light system allows for illumination during operation and whilst the gates open adding a great guidance and a tidy aesthetic to the installation. To use this feature an additional cable (also low voltage) will be required between the gate controller and each Apache operator. With an easy to use (and secure) manual release system in place.

  Operations are smooth and efficient using its 24 Volt DC motor driving the articulating arm clockwise/counter-clockwise. The end positions are set using the easiest possible method of adjustable limit stops. Limit stops are fitted to casted grooved positions to adjust both the maximum open and closed positions of the gate, being a mechanical system its a case of set and forget with no further adjustments being required. Typically the open and closed positions will not require and further stops unless higher wind loads are expected (cladded gates).

  The Apache operator is 100% Universal Left and Right side meaning the same unit could be installed on EITHER side of the driveway.

  The Apache is able to be installed with just a 40mm clear height available making it an easy choice when it comes to ground clearance, the Apache requires 450mm clear area from the edge of the driveway when the gate is open at 90° which makes it suited for the majority of installations where the gate is spaced away from neighboring feces and retaining walls.

  NO NEED FOR GATE STOPS, the on-body limit stops are totally adjustable in there positioning for both the open and closed positions.

  The connection for cable join between the Apache and the gate controller is made underneath the plastic cover and the wall/post/pillar mounting bracket allows for a conduit directly into the operator if desired.

  Key Features

  ✓ Designed, Engineered and Manufactured in Italy
  ✓ Fast and Efficient 24 Volt Operation
  ✓ LED Light System
  ✓ Full metal Gearbox
  ✓ Die-Cast Housing and Arm

  ✓ Quiet and discreet
  ✓ Open and Closed Position ADJUSTABLE without the need for a gate stop (adjustable limit stops)
  ✓ Flexible installation

  Easy to Adjust Open and Close Position Limit Stops

  

  LED Light

  when optionally connected to the control board (additional low voltage two core cable is used).
  Whilst in operation the LED Light will illuminate
  

  An Overview of the Apache Series Operator

  

  Manual Release System

  

  Driveway Gate Motor Specifications

  Operating Voltage	24V DC
  Duty Cycle	90%
  Torque	180 Nm
  Limit Stops	Yes, Open and Closed Positions (Adjustable)
  Gearing	All metal Gears
  Case Material	Die-Cast Inner Housing Structure, ABS Top Cover
  Maximum Gate Weight	2.5 Meters EACH
  Maximum Gate Weight	200KG EACH
  Cabling	2 Wire to Control Box (DC MOTOR), Additional 2 Wires for LED Light (optional)

  

   

  “Pull to Open”/”Push to Open” Installation Geometry

  

  x

  Apache 24V Articulating Arm Operator with Limit Stops

  • Maximum 5m Opening (2x2.5m Gates)/200KG Each Gate
  • Flexible Articulating Arms
  • Night Light LED System
  • Can swing Up To 120° (Adjustable)
  • Adjustable Open & Closed Limit Stops
  • Advanced Digital Control Board

  Show more

  • Maximum 5m Opening (2x2.5m Gates)/200KG Each Gate
  • Flexible Articulating Arms
  • Night Light LED System
  • Can swing Up To 120° (Adjustable)
  • Adjustable Open & Closed Limit Stops
  • Advanced Digital Control Board

  ×

  Out Of Stock

  Cable Options *

  Choose an option5m Cable and Junction (Motor and Night Light)5m Cable and Junction (Motor Only)7m Cable and Junction (Motor and Night Light)7m Cable and Junction (Motor Only)No Cable, I have my own Clear Out Of Stock

• 

  Description

  Apache Low Voltage 24 Volt Flexible Articulated Arm Gate Operator

  

  The Apache 24 Volt Swing Arm operator is a versatile and flexible operator allowing for connection to gates from flush mounting (0mm) up to 300mm set in away from the mounting point of the operator. Strong and quiet the Apache can operate gates smoothly and with ease with a rated capacity of up to 2.5m per gate (5m opening) and up to a maximum of 200kg per gate.

  The oversized ALL METAL GEAR structure inside ensures a seamless operation without breakdowns or premature life unlike plastic and nylon gear sets. Also boasting a robust die-cast alloy case to encapsulate the gearing system all gears, motor and bearings are totally closed in and sealed from any outer elements. Built into the Alloy case we will also find the clever clutch release system (Emergency release) which is keyed to unlock for added security.

  The unique Night Light system allows for illumination during operation and whilst the gates open adding a great guidance and a tidy aesthetic to the installation. To use this feature an additional cable (also low voltage) will be required between the gate controller and each Apache operator. With an easy to use (and secure) manual release system in place.

  Operations are smooth and efficient using its 24 Volt DC motor driving the articulating arm clockwise/counter-clockwise. The end positions are set using the easiest possible method of adjustable limit stops. Limit stops are fitted to casted grooved positions to adjust both the maximum open and closed positions of the gate, being a mechanical system its a case of set and forget with no further adjustments being required. Typically the open and closed positions will not require and further stops unless higher wind loads are expected (cladded gates).

  The Apache operator is 100% Universal Left and Right side meaning the same unit could be installed on EITHER side of the driveway.

  The Apache is able to be installed with just a 40mm clear height available making it an easy choice when it comes to ground clearance, the Apache requires 450mm clear area from the edge of the driveway when the gate is open at 90° which makes it suited for the majority of installations where the gate is spaced away from neighboring feces and retaining walls.

  NO NEED FOR GATE STOPS, the on-body limit stops are totally adjustable in there positioning for both the open and closed positions.

  The connection for cable join between the Apache and the gate controller is made underneath the plastic cover and the wall/post/pillar mounting bracket allows for a conduit directly into the operator if desired.

  Key Features

  ✓ Designed, Engineered and Manufactured in Italy
  ✓ Fast and Efficient 24 Volt Operation
  ✓ LED Light System
  ✓ Full metal Gearbox
  ✓ Die-Cast Housing and Arm

  ✓ Quiet and discreet
  ✓ Open and Closed Position ADJUSTABLE without the need for a gate stop (adjustable limit stops)
  ✓ Flexible installation

  Easy to Adjust Open and Close Position Limit Stops

  

  LED Light

  when optionally connected to the control board (additional low voltage two core cable is used).
  Whilst in operation the LED Light will illuminate
  

  An Overview of the Apache Series Operator

  

  Manual Release System

  

  Driveway Gate Motor Specifications

  Operating Voltage	24V DC
  Duty Cycle	90%
  Torque	180 Nm
  Limit Stops	Yes, Open and Closed Positions (Adjustable)
  Gearing	All metal Gears
  Case Material	Die-Cast Inner Housing Structure, ABS Top Cover
  Maximum Gate Weight	2.5 Meters EACH
  Maximum Gate Weight	200KG EACH
  Cabling	2 Wire to Control Box (DC MOTOR), Additional 2 Wires for LED Light (optional)

  

   

  “Pull to Open”/”Push to Open” Installation Geometry

  

  x

  Apache 24V Articulating Arm Operator with Limit Stops

  • Maximum 5m Opening (2x2.5m Gates)/200KG Each Gate
  • Flexible Articulating Arms
  • Night Light LED System
  • Can swing Up To 120° (Adjustable)
  • Adjustable Open & Closed Limit Stops
  • Advanced Digital Control Board

  Show more

  • Maximum 5m Opening (2x2.5m Gates)/200KG Each Gate
  • Flexible Articulating Arms
  • Night Light LED System
  • Can swing Up To 120° (Adjustable)
  • Adjustable Open & Closed Limit Stops
  • Advanced Digital Control Board

  ×

  Out Of Stock

  Cable Options *

  Choose an option5m Cable and Junction (Motor and Night Light)5m Cable and Junction (Motor Only)7m Cable and Junction (Motor and Night Light)7m Cable and Junction (Motor Only)No Cable, I have my own Clear Out Of Stock

• 

  Description

  STX4K Keyring High Range Remote

  

  The STX4K Keyring remote is a class leader in long range (up to 100 metres open air) and high security remote transmitters, using Keeloq rolling code technology provides the ultimate layer of security for your remote against over the air radio code thefts and copies of your remote which in-turn stops unwanted access or intrusions to your property.
  
  The Four buttons allow for usage of multiple features available from the gate system controller as well as the use on other gates and garage doors through the use of an external receiver (available separately).
  
  

  Key Features

  ✓ Up to 100 metres distance in open air
  ✓ Keeloq rolling code security
  ✓ Easy to Use yet SLIGHTLY set in buttons to prevent accidental operation
  ✓ Clear visibility red LED indicator which will illuminate upon a button press
  ✓ Hard plastic buttons to prevent stuck in buttons and splits from finger nails
  ✓ Slimline and modern ergonomic design
  ✓ Can work with garage doors, other brand gates, alarms etc. through the use of a remote receiver module

  x

  Four Button Keyring Remote Control (White)

  • Up to 100 Metre Open Air Distance
  • High Security Rolling Code
  • Slimline and Ergonomic

  Show more

  • Up to 100 Metre Open Air Distance
  • High Security Rolling Code
  • Slimline and Ergonomic

  ×

  Out Of Stock

  Provide a Sun Visor Clip? ($3) *

  Choose an optionNoYes Clear Out Of Stock

  Automatic Gate Remote Control Keyring Mounting STX4K White quantity

• 

  Description

  STX4K Keyring High Range Remote

  

  The STX4K Keyring remote is a class leader in long range (up to 100 metres open air) and high security remote transmitters, using Keeloq rolling code technology provides the ultimate layer of security for your remote against over the air radio code thefts and copies of your remote which in-turn stops unwanted access or intrusions to your property.
  
  The Four buttons allow for usage of multiple features available from the gate system controller as well as the use on other gates and garage doors through the use of an external receiver (available separately).
  
  

  Key Features

  ✓ Up to 100 metres distance in open air
  ✓ Keeloq rolling code security
  ✓ Easy to Use yet SLIGHTLY set in buttons to prevent accidental operation
  ✓ Clear visibility red LED indicator which will illuminate upon a button press
  ✓ Hard plastic buttons to prevent stuck in buttons and splits from finger nails
  ✓ Slimline and modern ergonomic design
  ✓ Can work with garage doors, other brand gates, alarms etc. through the use of a remote receiver module

  x

  Four Button Keyring Remote Control (Black)

  • Up to 100 Metre Open Air Distance
  • High Security Rolling Code
  • Slimline and Ergonomic

  Show more

  • Up to 100 Metre Open Air Distance
  • High Security Rolling Code
  • Slimline and Ergonomic

  ×

  Out Of Stock

  Provide a Sun Visor Clip? ($3) *

  Choose an optionNoYes Clear Out Of Stock

  Automatic Gate Remote Control Keyring Mounting STX4K Black quantity

• 

  Description

  Dukie Photocell Kit

  

  The Dukie series photocell kit will provide an invisible to the eye infrared beam across the driveway to prevent the gate closing from obstacles in the beams path. Both the photocells are wired back to the control box with low voltage wiring however the optional upgrade to Dukie+ photocell allows for battery operation on the further photocell from the gate control box meaning only one of the photocells is wired.

  Key Features

  ✓ 45° Adjustable in each direction, suited for inline and out of line posts ✓ Ultra modern and neat appearance ✓ Compact design fits almost anywhere at 100(L)x45(W)x35(D)mm ✓ NO and NC Relay Settings ✓ Excellent range characteristics of up to 10 meter distance between each photocell ✓ Unlimited sets can be installed on each system for added protective layers ✓ OPTIONAL Dukie+ upgrade for a battery operated transmitter cell on the far side

  x

  Dukie OR Dukie + Photocells

  Protects the vehicles in the path of the infrared beam. Each photocell can be turned 45° left or right to align with the other allowing for extremely flexible installation. Unlimited amount can be installed on each installation.

  Show more

  Protects the vehicles in the path of the infrared beam. Each photocell can be turned 45° left or right to align with the other allowing for extremely flexible installation. Unlimited amount can be installed on each installation.

  ×

  Out Of Stock

  Photocell Options *	Choose an optionDukie (Wired BOTH Sides) ADJUSTABLE ANGLE PhotocellDukie + (No cable to OTHER side of the driveway) ADJUSTABLE ANGLE Photocell
  Cable Length *	Choose an option3m Cable5m Cable10m CableNo Cable (BYO)7m Cable15m Cable20m Cable Clear Out Of Stock

• 

  Description

  Premier SW24 Advanced Digital Automatic Gate Controller

  

  The Premier SW24 Automatic gate system controller comes standard with a state of the art feature set catering for all types of installations, whether only requiring ordinary residential operation to all the way up to a full fledged setup requiring advanced logic principals taking advantage of the 70% duty cycle.

  The on-board display makes easy work of any settings changes if desired and is easily visible in the outdoors being the advantage of LED displays. With multiple Inputs and outputs just about any accessory is compatible with the Premier SW24 system (see the complete list below). Also boasting multiple safety inputs along with its precise on-board detection it allows safety to remain prioritized for any application.

  The installation process is always kept in mind allowing up to 7 cable inputs into the outdoor weatherproof gate control box using IP68 cable glands, you will never run out of space or provisions for more.

  The genius automatic learning system, hold one key to enable and begin the automatic learning of the gate system and automatic definition of the ramp up and slow down points, its as easy as it gets suiting all skill levels from DIY once off installs to professional installers.

  All connections are Low Voltage and safe for all installers regardless of the skill level without the concern of electrical shock.

   

  Automatic Gate System Features

  

  Features as Standard

  ✓ Easy to use Single Button Mode of Opening-Stop-Closing including the “Stay open” feature
  ✓ Automatic Closing Timer Adjustable in one second increments up to 5 minutes
  ✓ Automatic learning of the gate + Fine tunable operating Times
  ✓ Soft Start (Ramp UP) and Soft Stop/Slowdown (Ramp DOWN)
  ✓ Adjustable Slow Down Speed and Time

  ✓ Fortress Series Electric Lock Support
  ✓ Low Voltage Power for all accessories directly through the gate controller
  ✓ Warning Light Output

  Normal Modes allow for the “STAY Open” feature to cancel the automatic closing timer by remote Handy when expecting guest, backing in a trailer etc.

   

   

  Multiple Configurable Safety Inputs

  ✓ Obstacle Detection by load This feature is always running and detecting if the gate is stalled under load by an obstacle during its travel.
  ✓ Typical Photocell Input Terminal to prevent gate from closing on vehicle, reverts gate if a vehicle passes through during closing, restarts the Automatic closing timer after each interruption.
  ✓ Photostop Input, Same as the typical photocell input with an added feature of preventing the gate from opening if the photocell is blocked. Handy for short driveways and also opening outwards installations.
  ✓ Special Detector Input to tell the gate to close two seconds after the vehicle passes, perfect for higher security applications (and also escaping dogs).
  ✓ Safety Edge Input Installed on to the gate, safety edges allow for a return to open if the edge of gate is to touch an obstacle.
  ✓ Emergency Stop Button This feature allows for a manned button to immediately stop the system open pressing.

  Wired and Wireless Access Control Support

  ✓ Keypads Wired or Wireless Secure PIN Number access (Tekno K1/Dex4)
  ✓ Press Button Simple button operation
  ✓ Mobile APP Control Cloud based and operatable anywhere in the world (Tekno WF)
  ✓ Doorbell Intercom Systems
  ✓ Exit Wands and Induction Loops To automatically operate the gate upon vehicle presence
  ✓ GSM 4G Technology Operate the gate by phone call (or intercom phone call) (Tekno 4/Tekno S1)
  ✓ Weekly Schedule Timer To automatically operate the gate based on a programmed daily/weekly operating times

  Residential, Commercial and Complex Working Modes Options

  ✓ Normal Remote Operation (Open-Stop-Close)
  ✓ Normal Remote Operation (Open-Stop-Close) with Automatic Closing Timer and “Stay Open” feature (299 Seconds/5 Minutes)
  ✓ Typical Complex – Individual Open and Close Command Inputs
  ✓ Typical Complex – Individual Open and Close Command Inputs with Automatic Closing Timer “Stay Open” feature by wired input (299 Seconds/5 Minutes)
  ✓ Secure Complex – Open Only Command Inputs with Automatic Closing Timer (299 Seconds/5 Minutes) “Stay Open” feature by wired input

  Automatic Gate System Controller Specifications

  Operating Voltage	24V DC Via Solar Regulator
  Duty Cycle	70%
  Standby Consumption	20mA
  Automatic Gate Lock Support	Yes, 24V DC
  Light Support	Yes, 24V DC
  Accessories Voltage	Yes, 12V DC
  Safety Inputs	Photocells, Safety edges, Induction Loops, Edge Sensors, Emergency Stop Button
  Operating Temperature	-10°-60°C
  Maximum Remotes	192

  Control Box and Battery Box Dimensions

  

  CERO Built IN ready to go PWM Solar Regulator

  

  The Cero Solar Regulator is PWM type suited for Gel, Sealed and Flooded batteries. It operates in a 3 stage charging control to ensure optimal performance to the batteries and provide the greatest longevity. The Cero is has protections in place in case of errors and failures in the solar panel installation or battery installation and will shut down in the case of short circuit and overload, then restart once clear.

  The LCD display provides accurate data on the current input voltage from the solar panel, the current stage of charging and also the current battery voltage making it easy to check the status on the fly.

  ✓ Large copper input terminals (12-28AWG)
  ✓ Ribbed metal heat sink across the entire back side
  ✓ LCD Display
  ✓ 3 Stage PWM Management (Bulk, Boost, Float)
  ✓ Supports Sealed, Gel and Flooded Batteries
  ✓ Short Circuit, Open Circuit ,Overload Protection along with multiple other protections
  ✓ Allows for a total of 10 Amps Inputs
  ✓ High Efficiency
  ✓ USB Terminal
  ✓ Temperature Compensation
  ✓ Low voltage disconnect and reconnect
  

   

  x

  Premier 24V Weatherproof SOLAR Swing Gate Control Box

  • Supplied with Cero 10A Solar Regulator
  • Digital Display
  • Speed Control + Ramp Up + Slow Down
  • Automatic Close Timer
  • Automatic Lock Support
  • Supports Battery Backup

  Show more

  • Supplied with Cero 10A Solar Regulator
  • Digital Display
  • Speed Control + Ramp Up + Slow Down
  • Automatic Close Timer
  • Automatic Lock Support
  • Supports Battery Backup

  ×

  Out Of Stock

• 

  Description

  High Wattage PREMIUM Monocrystalline Solar Panel + Adjustable 30mm Fence Mounting Post

  

  
  Solar Panel can be installed vertically or horizontally.
  
  
  ✓ PREMIUM QUALITY Monocrystalline 24V Solar Panel
  ✓ True IP67 Rating
  ✓ 97% or greater power tolerance
  ✓ Anodized Silver Aluminum Frame
  ✓ Long 10 Metre Cable (or cut to required size)
  ✓ Three Solar System Arrangement (1x 60W, 120W (2x60W Panels) or 180W (3x 60W Panels)) Each panel is supplied with its own post
  

  Maximum Power(Pmax)	60W/120W/180W
  Optimum Operating Voltage(Vmp)	35.5V
  Optimum Operating Current(Imp)	1.13A
  Open Circuit Voltage(Voc)	43.1V
  Short Circuit Current(Isc) 40/80/120W	3.4A/6.8A/10.2A
  Power Tolerance	-1%~+3%
  Operating Module Temperature	40 C to +85 C

  Heavy Duty ADJUSTABLE Solar Pole

  

  
  
  ✓ Powder Coated 30mm Diameter Steel Mounting Pole, Adapter and Plate
  ✓ Allows for Panel installation in a Vertical or Horizontal Orientation
  ✓ Pre-Set Fixed Angle best suited for the southern hemisphere
  ✓ Mounts to Fence, Wall or Post by supplied saddles to suit all installations
  

  x

  24V Solar Panel and Heavy Duty Post Installation System

  Out Of Stock

  Cable Length	10m Cable Choose an option3m Cable5m Cable10m Cable7m Cable20m Cable
  Solar Panel System *	Choose an option24V 60W Panel System24V 120W Panel System (Dual Array 60W)24V 180W Panel System (Triple Array 60W)

• 

  Description

  Battery System

  

  Supplied with an external Dual DEEP CYCLE battery system 24V 15aH system as standard in a SLIMLINE Waterproof and Dust Proof Rated Enclosure (IP67 Cable Gland Supplied), there are a total of THREE battery capacity options available.

  Option 1 (Premier 24-15B): The 15aH Deep Cycle setup allow for up to a two and a half weeks of usage without any charge from the solar panel in a typical residential installation of 10 cycles per days (whilst factoring in standby power), this is the ideal choice for areas that may see a consistent week of poor weather poor weather through winter without sunlight. This is great choice VIC, NSW, SA, ACT, TAS, QLD, NT and WA.

  Option 2 (Premier 24-22B): The 22aH Deep Cycle setup allows for well over three weeks in a typical residential installation of 10 cycles per days without seeing any charge from the solar panel (whilst factoring in standby power). It can also support Light commercial usage.

  Option 2 (Premier 24-26B): The 26aH Deep Cycle setup allows for well over four weeks in a typical residential installation of 10 cycles per days without seeing any charge from the solar panel (whilst factoring in standby power). It can also support Medium commercial usage of 10-15 operations per day for a period of approx. 2 weeks.

  The allowances are general in nature and typically factor for a continuous period taking into account overcast and other poor weather conditions along with wet seasons that will contribute to a no charge/minimal charge result from the solar system. These allowances do not take into account shade on the solar panel which will effect the overall charging.

  These allowances DO NOT take into account WiFi and Bluetooth Modules, as system consumption will increase using one of these devices Always use the next option up from requirment.

  		Premier 24-15B	Premier 24-22B	Premier 24-26B
  IP Rating		IP67 Waterproof	IP67 Waterproof	IP67 Waterproof
  Battery		2x 15aH DEEP CYCLE	2x 22aH DEEP CYCLE	2x 22aH DEEP CYCLE
  Enclosure Dimensions (L x W x D)		220x290x130mm	400x300x170mm	400x300x170mm
  Recommended Usage by State (General Guideline)		All States	All States + Light Commercial	All States + Medium Commercial
  Cable Inlet/Outlet (Weatherproof)		6x Supplied	3x Supplied	3x Supplied
  Mounting Method		Through Box	External Mounting Bracket (supplied)	External Mounting Bracket (supplied)

  x

  24V DEEP CYCLE Battery System in Enclosure

  Out Of Stock

  Battery System *	Choose an optionDEEP CYCLE 15aH (2x15aH Batteries)DEEP CYCLE 22aH (2x22aH Batteries)DEEP CYCLE 26aH (2x26aH Batteries)
  Battery Box Cable Length *	Choose an option1m Cable from Battery Box to Control Board3m Cable from Battery Box to Control Board6m Cable from Battery Box to Control Board10m Cable from Battery Box to Control Board Clear Out Of Stock

• 

  Description

  Dex 4 Wireless Keypad

  

  The Dex 4 Wireless Keypad can communicate directly to the gate system using the same Keeloq secure rolling code signal as the remotes allowing for an easy installation process without the need for wiring.

  Due to its high quality chipset the open air signal strength can exceed an astounding 80 meters. This makes the Dex 4 not only suited to controlling the gate but could actually be used to control the garage door, another gate etc. providing they have the compatible receiver installed, Up to FOUR devices/features could be used with individual pin codes for each due to its four independent output channel designs.

  Key Features

  ✓ Three colour options are available: Classic White, Subtle Grey and Deep black
  ✓ Compact design fits almost anywhere at 90(L)x77(W)x35(D)mm
  ✓ Control Up to four systems or four features on different pin codes
  ✓ Astounding open air distance of 80 metres
  ✓ Works on 2x AAA batteries (supplied)
  ✓ Audible and LED indicators
  ✓ Totally wireless (wire free) easy installation

  Power	2xAAA Batteries (Supplied)
  Operating Distance	80 Meters Open Air
  Frequency	Secure Rolling Code 433MHZ
  Operating Channels	4
  Transmitting Time	1.5s

  x

  Wireless Keypad (Three colour options) × 2

  Four channel wireless keypad allowing for full control of all automatic gate features without the need for wiring.

  Show more

  Four channel wireless keypad allowing for full control of all automatic gate features without the need for wiring.

  ×

  Out Of Stock

  Colour *

  Choose an optionBlackGreyWhite Clear Out Of Stock

• 

  Description

  Fortress EL Automatic Gate Lock

  

  The Fortress EL totally AUTOMATIC electric gate lock system allows for a secure hold over the gate particularly handy when the gate is wide, prone to wind resistance or in an application requiring an additional layer of security. Prior to beginning the gate operation the electric lock first unlatches then begins to move the gates to the open position, during the closing the lock will automatically latched closed when reaching the end of cycle.

  
  The Fortress EL is supplied with both a gate to post latching plate (for single gates) and also a gate to ground latching plate (for double gates to be used with a metal gate stop).

  For double gates a rebate/lip should be installed on the front of the trailing gate to prevent it being pushed past the locked gate (essentially both gates are locked this way).

  
  
  

  Key Features

  ✓ Zero power consumption when locked in standby
  ✓ All metal construction
  ✓ Works with the gate controllers battery system
  ✓ Release keys supplied in-case of total power loss
  ✓ Easy 2 Wire connection
  ✓ flexible installation

  Specifications

  Power	24V DC
  Consumption	15VA
  Lock Body Size	124x67x35mm
  Mounting Size	Vertical OR Horizontal
  Cable Length	7 Meters

  x

  Automatic Electric Lock for with 7 Meter Cable

  Additional layer of security and hold of the gate when reaching close to the max width, windy areas or to work against higher risks.

  Show more

  Additional layer of security and hold of the gate when reaching close to the max width, windy areas or to work against higher risks.

  ×

  Out Of Stock

• 

  Description

  Tekno S1 4G LTE GSM Switch

  

  The Tekno S1 is a flexible control device allowing for connection to the gate system and operation from anywhere in the world by a simple phone call. Easy to install and configure it is the best solution when no Wi-Fi or internet connection is available and a great alternative to APP based control. The requirement is good 4G/3G Network at the gate position and a sim card that can accept voice calls (not data sims). 

  Key Features

  ✓ Call your gate from ANYWHERE in the world
  ✓ Control by SMS
  ✓ Can be configured to allow for Authorized users (Telephone numbers allowed to operate the S1) or Public Mode (Anyone)
  ✓ Fits directly into the system, no extras required
  ✓ Simple connection and simple setup

  The Tekno S1 can work with all 4G Telco providers however please note the recommended network of choice is telstra providing the strongest 4G coverage.

  Specifications

  Operating Voltage	9-36V DC
  Power Consumption	45mA Standby/<130mA Initialization and calling
  Sim Card Size Length	Nano Sim
  4G Network	TDD: 2300(B40)>FDD 2100(B1)/1800(B3)/2600(B7)/900(B8)/1900 (B2)/1700(B4)/850 (B5)/700APT(B28)
  3G Network	2100(B1)/1900(B2)/850(B5)/90038)

  x

  Tekno S1 3G 4G LTE GSM Controller Sim Card Gate Controller 4G

  Out Of Stock