Universal Left/Right Heavy Duty Adjustable Bearing KNOCK IN Aluminum SHS Square Tube 50mm for Swing Gate
Part No:
SH-SHS-AL50
Adjustable 50x50 Aluminum Tube Knock In Hinge
✓ Ball Bearing Race Design for Top and Taper Roller Bearing for Bottom
✓ Knocks directly into the tube from top and bottom
✓ Supports up to 400KG per pair of hinges
✓ Adjustable distance from post to center of gate
✓ Steel 90 Degree Bracket can be welded if required to steel posts
✓ Can be installed on to narrow posts
✓ Suitable for 1.6mm wall thickness, 2.0mm may require slight grinding on the cap face
✓ Knocks directly into the tube from top and bottom
✓ Supports up to 400KG per pair of hinges
✓ Adjustable distance from post to center of gate
✓ Steel 90 Degree Bracket can be welded if required to steel posts
✓ Can be installed on to narrow posts
✓ Suitable for 1.6mm wall thickness, 2.0mm may require slight grinding on the cap face
Technical Drawing
Alternative Products
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.