This Premium Quality product is Made in Italy and is provided with a TWO year Warranty
ATS 5 24V Extra Heavy Duty Long Stroke Telescopic Linear Actuator with Limit Switches and Encoder
$745.00 – $775.00
Heavy Duty Telescopic Linear Actuator with Encoder and Limit Switches
The ATS series Telescopic Linear Actuator is a Mid torque, limit switched TELESCOPIC linear actuator with an impressive feature list. All metal gears build sets it apart from others with its expansive reach of 1550mm in full expansion it can provide impressive hold strength over gates without the need for an electric lock (unless gate is clad/covered).
Its capacities of gates range up to a 10m Driveway opening (2x 5 Metres Gates) in length (0r 5.4m/18FT farm gates) or 1000 KG in weight each making it a robust high grade unit further enhanced by its precise encoder controlled motor and easy to set limit switches for both the open and closed position making its longevity pronounced due to its no load stopping characteristics
Adjustable Limit Switches
Precise adjustability when using the onboard limit switches housed within the unit, Intelligently designed these limit switches run each on there own lead screw within the unit keeping them perfectly safe from the outdoor elements. They are adjusted forward and back by turning screw with a screwdriver according to the direction required.
Inside the ATS
Swivel End
Typically a linear actuator is a rigid unit and has very little tolerance for up-down movement in the gate however with the swivel system there is now some allowance, typical scenarios that would utilize the swivel would be gates with a support wheel, gates with a slight sag or gates with misaligned hinges. Note that this will not support rising gates.
Built In Encoder
Undisputedly the best technology the encoder motor is standard and will feedback to the system where the gate motor and effectively the gate is in its travel through the entire cycle. Allowing for reliable operation regardless of any changes in operation be it due to temperature, wind or other factors. This is the technology you can rely on for constancy and peace of mind.
Conduit Feed
Supplied with a 20mm corrugate conduit gland this allows for the best protection of the actuators cable without any modifications required to the structure. If required it could be replaced with a typical cable gland.
Manual Release System
In the case of a power outage, simply open the cover and using the supplied key you can release the actuator. Once release you can open and close the gate by hand until ready to re-lock.
If required there is an optional battery backup system available which will fit directly into the systems control box allowing for uninterrupted operation.
Installation Geometry
Telescopic Actuator Dimensions
Specifications
| Maximum Gate Length | 5m Each |
| Maximum Gate Weight | 1000KG Each |
| Maximum Opening Angle | 120° |
| Encoder | Yes |
| Motor Power (Volts) | 24V DC |
| Power (Watts) | 80W |
| Operating Temperature | -20° to +55° C |
| Stroke | 300mm |
| Thrust (N) | 3000N Max |
| Duty Cycle | 70% |