Remote Control Magnetic lock and Access Control Power Supply Combo
280KG Waterproof Magnetic Lock (12V DC)
The Fortress ML Magnetic lock has a hold ability of 280KG when energized, it can be powered by 12V DC ONLY. Magnetic locks unlike solenoid based locks will released when commanded to unlock by the control system even whilst under load making a magnetic lock an excellent option for most applications.
✓ Suitable for Small and Large Gates✓ Suitable for Single and Double Gates
✓ Provided with Both an L bracket for magnetic lock mounting and an adjustable Z bracket for the armature plate alignment
Magnetic Lock Specifications
| Operating Voltage | 12V DC |
| Consuption | 450mA(12V) |
| Body Size | 222x42x26mm |
| Armature Plate Size | 180x38x12mm |
280KG Waterproof Magnetic Lock (12V DC)
The Fortress ML Magnetic lock has a hold ability of 280KG when energized, it can be powered by 12V DC ONLY. Magnetic locks unlike solenoid based locks will released when commanded to unlock by the control system even whilst under load making a magnetic lock an excellent option for most applications.
✓ Suitable for Small and Large Gates✓ Suitable for Single and Double Gates
✓ Provided with Both an L bracket for magnetic lock mounting and an adjustable Z bracket for the armature plate alignment
Magnetic Lock Specifications
| Operating Voltage | 12V DC |
| Consuption | 450mA(12V) |
| Body Size | 222x42x26mm |
| Armature Plate Size | 180x38x12mm |
STX4K Keyring High Range Remote
The Four buttons allow for usage of multiple features available from the gate system controller as well as the use on other gates and garage doors through the use of an external receiver (available separately).
Key Features
✓ Up to 100 metres distance in open air✓ Keeloq rolling code security
✓ Easy to Use yet SLIGHTLY set in buttons to prevent accidental operation
✓ Clear visibility red LED indicator which will illuminate upon a button press
✓ Hard plastic buttons to prevent stuck in buttons and splits from finger nails
✓ Slimline and modern ergonomic design
✓ Can work with garage doors, other brand gates, alarms etc. through the use of a remote receiver module
Lock Control Power Supply
This lock control power supply is not suitable for outdoor use UNLESS installed in a plastic enclosure (PREMIER-BBOX-L), it should not be installed in ceiling spaces to prevent overheating.
Automatic lock control power supply suitable for electric locks, magnetic locks, electric bolts, access control keypads, em card readers and alike.
The lock control power supply can power devices continuously for a maximum of 3 Amps and with an allowance for a spike up to 5A (electric bolts and fail secure solenoid locks).
Suitable for integration with intercom systems, access control systems, exit buttons and other devices with a voltage free relay contact into the exit button input OR devices with a momentary voltage output of 5-30V DC into the control input.
Supplied with a short battery harness (extendable) the power supply can utilize a 12V battery (typically a 7aH) for continued operation in a case of power outage.
Access Control Power Supply Specifications
| Input Voltage | 90-260V AC |
| Output Voltage | 12V DC |
| Accessories Constant Voltage Terminal | 12V DC |
| Max Current | 5A Momentary, 3A Continuous TOTAL |
| Supports Battery Backup | Yes, 12V DC (F1 Terminal Harness - Short Length) |
| Lock Types | Fail Secure(NO)/Fail Safe (NC) |
| Exit Button Suport | Yes, Voltage Free N/O Momentary Contact |
| Exit Button Timing | Adjustable, 1-15 Seconds |
| Control Input | Yes, 5-30V DC Polarized |
| Operating Temperature | -10°-60°C |
Lock Control Power Supply
This lock control power supply is not suitable for outdoor use UNLESS installed in a plastic enclosure (PREMIER-BBOX-L), it should not be installed in ceiling spaces to prevent overheating.
Automatic lock control power supply suitable for electric locks, magnetic locks, electric bolts, access control keypads, em card readers and alike.
The lock control power supply can power devices continuously for a maximum of 3 Amps and with an allowance for a spike up to 5A (electric bolts and fail secure solenoid locks).
Suitable for integration with intercom systems, access control systems, exit buttons and other devices with a voltage free relay contact into the exit button input OR devices with a momentary voltage output of 5-30V DC into the control input.
Supplied with a short battery harness (extendable) the power supply can utilize a 12V battery (typically a 7aH) for continued operation in a case of power outage.
Access Control Power Supply Specifications
| Input Voltage | 90-260V AC |
| Output Voltage | 12V DC |
| Accessories Constant Voltage Terminal | 12V DC |
| Max Current | 5A Momentary, 3A Continuous TOTAL |
| Supports Battery Backup | Yes, 12V DC (F1 Terminal Harness - Short Length) |
| Lock Types | Fail Secure(NO)/Fail Safe (NC) |
| Exit Button Suport | Yes, Voltage Free N/O Momentary Contact |
| Exit Button Timing | Adjustable, 1-15 Seconds |
| Control Input | Yes, 5-30V DC Polarized |
| Operating Temperature | -10°-60°C |