Radius Gate Panel (1770H x 1000W) - Adaptable Master/Slave with Removable Wheel Pockets
Radius Gate Frame
Specifically designed for Radius (turning) gate applications this gate measures at 1000mm width and 1770mm Height (with cut-outs) giving a final installed height of Aprox. 1800mm (+/- depending on final weight of gate and load against the spring wheel).
Laser welded (pre-galvanized steel) gives the best strength and versatility for the gate frame and can be used for most cladding applications
A bottom 120mm rail provides a clean aesthetic of checked in wheel structure and these panels can be used as Masters (SLM) or Slave (SLS/E) panels thanks to the clever removable pocket designs.
Regardless off direction when a pockets is removed the remaining area is already welded closed for a clean final finish without the need of plastic caps.
The versatile design gate frame is suitable for both INTERNAL horizontal cladding (up to 20mm material thickness) (cladding channels available as an extra) or EXTERNAL vertical/Horizontal Cladding of any thickness. Additional bracing kits are available if a horizontal support rail is required.
Key Features
✓ Proper Rigid Steel Gate, 100% Welded (NO flat pack and NO concerns about flex, integrity or assembly)✓ Pre-Galvanized Steel Tubing
✓ Satin Black Powder Coating (NIGHT SKY COLOUR)
✓ RHS 120x50 Bottom Rail
✓ SHS 50x50 Top and Sides
Dimensions
Important Information - Measurement details and Requirements
| Width of Gate Panel | 1000mm EACH |
| Height of Gate Panel | 1770mm (minus Cutouts 70mm) + Radius Wheels |
Radius Gate Frame
Specifically designed for Radius (turning) gate applications this gate measures at 1000mm width and 1770mm Height (with cut-outs) giving a final installed height of Aprox. 1800mm (+/- depending on final weight of gate and load against the spring wheel).
Laser welded (pre-galvanized steel) gives the best strength and versatility for the gate frame and can be used for most cladding applications
A bottom 120mm rail provides a clean aesthetic of checked in wheel structure and these panels can be used as Masters (SLM) or Slave (SLS/E) panels thanks to the clever removable pocket designs.
Regardless off direction when a pockets is removed the remaining area is already welded closed for a clean final finish without the need of plastic caps.
The versatile design gate frame is suitable for both INTERNAL horizontal cladding (up to 20mm material thickness) (cladding channels available as an extra) or EXTERNAL vertical/Horizontal Cladding of any thickness. Additional bracing kits are available if a horizontal support rail is required.
Key Features
✓ Proper Rigid Steel Gate, 100% Welded (NO flat pack and NO concerns about flex, integrity or assembly)✓ Pre-Galvanized Steel Tubing
✓ Satin Black Powder Coating (NIGHT SKY COLOUR)
✓ RHS 120x50 Bottom Rail
✓ SHS 50x50 Top and Sides
Dimensions
Important Information - Measurement details and Requirements
| Width of Gate Panel | 1000mm EACH |
| Height of Gate Panel | 1770mm (minus Cutouts 70mm) + Radius Wheels |