Skip to Content


Automate the gate you already have.

Gate openers for sliding, swing, farm and pedestrian gates, matched to your gate's weight and width. No gate yet? We supply the gates and the hardware too.

Not sure what fits? Send us a photo and the gate's width and weight — we'll tell you which kit suits and which one doesn't. Same-day answers, Mon–Fri.

10,000+installations across Australia
Stocked hereShipped from our Melbourne warehouse
Phone supportBefore you buy and after you install
Gates tooPre-made and custom gates, hinges, wheels and latches — not just motors

Brands you can trust

Stocked, supported and warranted here — not drop-shipped from overseas.

Pick the gate type you've got and we'll show you all the available options

Each driveway gate type is listed with the ways it can be powered. If there's no power near your gate, that's the first thing to sort out — and it's rarely a dealbreaker.

Mains power at the gate 240 V run out to the gate, transformer in the control box.
Low voltage Power supply stays in the garage or shed and low-voltage cable runs to the gate. No trenching a 240 V circuit.
Standalone solar Panel and battery at the gate. Suits installs where it may not be possible to run a power line to the gate.

Specialty gates

Commercial gate automation

Gates, with or without automation

Gate & fencing hardware

View all hardware

The steel that makes a gate work — and the parts that wear out first.

Intercoms & access control

View all access control

See, speak to and let visitors in from your phone — works with most gate openers, ours or otherwise.

Automation accessories

View all accessories

The parts that finish an install, upgrade an old gate, or replace something that's failed.

Not sure which one you've got?

Two questions. Most people get it wrong between sliding, cantilever and telescopic — and that's the difference between a kit that fits and a return.

How does your gate move?

Real customers. Real gates.

5.0 on Google, from customers who bought the kit, installed it themselves and told us how it went.

★★★★★
Awesome products that are made simple enough to DIY. The customer service is superb to troubleshoot any programming or issues over the phone — they know the automation like the back of their hands.
Adam K. — Google review
★★★★★
I ordered my gate kit over the phone on Tuesday, it was sitting on my door step when I got home from work Thursday. The bloke who took my order was informative, patient and helpful.
Stephen B. — Google review
★★★★★
I only use Alpha Automation for my clients' electrical gate needs. The service from their team is next to none, always providing solid advice and expertise, making the ordering and installation process seamless.
Chris G. — installer, Google review

Before you buy

Do I need mains power at the gate?

Not necessarily. Our 24 V kits let you keep the power supply in the garage or shed and run low-voltage cable out to the gate, which avoids trenching a 240 V circuit down the driveway. If there's no practical way to get a cable there at all, a standalone solar kit with a panel and batteries at the gate will run a gate that cycles multiple times a day, and keep running through a prolonged stretch without sun. High duty cycle and commercial sites typically still want mains at the gate, or a larger solar system, which we also supply.

Can I fit a gate opener myself?

Most people do. The mechanical side is bolt-on and the wiring is low voltage. Every kit ships with detailed instructions, most have video guides to go with them, and our phone support is free whether you bought the kit last week or three years ago.

How do I work out my gate's weight?

Measure the gate and tell us what it's made of. Aluminium slat, steel tube with palings, solid steel sheet and hardwood all weigh very differently over the same span, and solid infill also catches wind — which loads a motor far harder than weight alone. Send us the width, height and material and we'll size it for you.

What happens in a blackout?

Every kit has a manual release so you can push the gate open by hand after unlocking. Most of our motors are 24 V and have the option of an internal battery, so they'll keep cycling for a good portion of the day without mains power. If your driveway is your only way out, ask us about battery backup before you order.

Will it work with my existing remotes?

Typically not. Every brand uses its own proprietary coding, even where the frequency matches. In most cases a receiver can be fitted to your existing equipment instead, so one new remote operates both the gate and the garage door on separate buttons.

Will it work with my existing intercom?

Typically yes, provided the intercom has a gate release or gate operation feature. Tell us the brand and model and we'll confirm before you spend anything.

What does freight cost and how long does it take?

Kits ship from our Mordialloc warehouse. Melbourne metro, Sydney, Adelaide, Brisbane and Canberra are typically two to four business days; WA, NT and regional runs longer, and seasonal holidays do affect these times. You'll see the exact cost at checkout before you commit, and we'll combine items into one consignment where we can. Express post is available at checkout for smaller items, along with next-day delivery options for Melbourne metro.

Do I need a safety beam?

Yes. An automatic gate is a machine, and photocells are what stop it before it touches a child, a pet or a car. They're included in most of our kits, base kits aside. The equipment also has obstruction sensing, but that only reacts once the gate has pushed against something, and depending on the capacity of the system there can be a delay before it does.

Tell us the gate. We'll tell you the kit.

Width, height, material and a photo if available is all we need. No quote forms, no waiting three days — you'll get an answer from a specialist.

Afterpay and Zip available at checkout · Australian warranty, handled here · Free phone support before and after you install