2085mm x 1500mm Cladding Driveway Gate Frame (Internal/External Cladding) (Pearl Gloss White Powder Coat)
Part No:
FRAME15-2085WH
Bulky Item
This ad is for ONE gate panel only.
Versatile Driveway Swing Gate Frame for cladding
The versatile design gate frame is suitable for both INTERNAL horizontal cladding (up to 20mm material thickness) or EXTERNAL vertical/Horizontal Cladding of any thickness.
The gate features an open center which does not interfere with internal cladding. The construction is of pre-galvanized steel RHS tubing for the Bottom Rail (80x40mm) and SHS tubing (40x40mm Top and Sides). Every join on the gate is welded providing the best strength and rigidity unlike flat pack gates.
✓ Pre-Galvanized Steel Tubing
✓ Pearl Gloss White Powder Coating
✓ RHS 80x40 Bottom Rail
✓ SHS 40x40 Top and Sides
The gate features an open center which does not interfere with internal cladding. The construction is of pre-galvanized steel RHS tubing for the Bottom Rail (80x40mm) and SHS tubing (40x40mm Top and Sides). Every join on the gate is welded providing the best strength and rigidity unlike flat pack gates.
Key Features
✓ Proper Rigid Steel Gate, 100% Welded (NO flat pack and NO concerns about flex, integrity or assembly)✓ Pre-Galvanized Steel Tubing
✓ Pearl Gloss White Powder Coating
✓ RHS 80x40 Bottom Rail
✓ SHS 40x40 Top and Sides
Dimensions
Important Information - Measurement details and Requirements
| Width of Gate Panel | 2085mm EACH |
| Height of Gate Panel | 1500mm |
| Combined Width | 2085mm+2085mm= 4170mm |
| Additional Space Requirements | 15-20mm for EACH Hinge Side + 15-20mm Between Gates in Centre |
| Total Space Requirements Including Mandatory Gaps BETWEEN POSTS MEASURMENT | MIN. 4215mm to Max. 4230mm + POSTS |